Order now   Enquiry
  Call us

Levelling feet for equipment & machinery

Levelling feet vulkanised galvanised type SWO

Manufacturer: Martin

 SWO stopka do maszyn Martin

D A B Wrench M G Load(kG)

50


29

50,100 14  M10 
 19 


400

50, 100, 150  14 M12
50, 100, 150  14 M14
75, 100, 150  16 M16
80 35 50,100 14 M10 25
1000

35 50, 100, 150  14 M12
35 50, 100, 150  14 M14
35 75, 100, 150 16 M16
38 75, 100, 150, 200 20 M20
40 75, 100, 150, 200 24 M24
100  37,5  75, 100, 150, 200  16  M16  28     1500    
38,5 75, 100, 150, 200, 250  20   M20 
38,5  100, 150, 200, 250  24   M24 
39,5 100, 150, 200, 250   30  M30
120 41,5 75, 100, 150, 200 16 M16 32 3000
42,5 75, 100, 150, 200, 250  20 M20
42,5 100, 150, 200, 250 24 M24
43,5 100, 150, 200, 250 30 M30

* Base material: galvanised steel, vulkanized rubber NBR 80 Shore. Screw material: galvanised steel. Also available with a steel nut on request.

* Load values shown in the table refer to static conditions, calculated at half the screw’s length. In conditions involving vibrations or in the presence of dynamic loads, the values need to be reduced. For further information contact our technical staff.
We cannot assume liability for products which have been changed or modified.

When ordering, please give the designation of the mount in the following order:
SWO-D-MxB mount, e.g.:
SWO-80-M16x150 mount

  

Note: Despite our greatest efforts, we cannot guarantee that the information published on this site is free of errors. Errors in the product descriptions cannot be the basis for any claims. Should you have any doubts, please contact our sales department, before deciding to purchase the product.
Order now
© Wibroizolacja Spółka z o.o.
made by InfraNet