Levelling feet for equipment & machinery

Levelling feet stainless type PSN

Manufacturer: Martin

 

 

D	A	B	Wrench	M	h	G	Load (kG)	Standard	Anti-slip
83	36	50, 75, 100, 125	14	M10	3	28	1500	X	X
	36	50, 75, 100, 125	14	M12			1500	X	X
	36	50, 75, 100, 125, 150, 175	14	M14			2000	X	X
	40	50, 75, 100, 125, 150, 175, 200	13	M16			2000	X	X
	40	75, 100, 125, 150, 175, 200, 225	17	M20			2000	X	X
103	45	50, 75, 100, 125, 150, 175, 200, 225	17	M16	3	33	3500	X	X
	45	75, 100, 125, 150, 175, 200, 225	17	M20				X	X
	47	75, 100, 125, 150, 175, 200, 225	20	M24				X	X
123	50	50, 75, 100, 125, 150, 175, 200, 225	20	M16	3	37	4500	X	X
		75, 100, 125, 150, 175, 200, 225	20	M20				X	X
		75, 100, 125, 150, 175, 200, 225, 250	20	M24				X	X
		100, 125, 150, 175, 200, 225, 250	26	M30				X	X

* Base material: glass fibre reinforced polyamide. Available in an anti-slip version with NBR 70 Shore rubber on request (standard version without rubber). Screw material: 1.4301 stainless steel (1.4401 on request). Also available with a steel nut on request.
* Load values shown in the table refer to static conditions, calculated at half the screw’s length. In conditions involving vibrations or in the presence of dynamic loads, the values need to be reduced. For further information contact our technical staff.
We cannot assume liability for products which have been changed or modified.

Product available only on request.

When ordering, please give the designation of the mount in the following order:
PSN-D-MxB mount + version, e.g.:
PSN-83-M16x150 mount anti-slip

 

 

Note: Despite our greatest efforts, we cannot guarantee that the information published on this site is free of errors. Errors in the product descriptions cannot be the basis for any claims. Should you have any doubts, please contact our sales department, before deciding to purchase the product.