Vibration isolators for equipment & machinery

Vibration isolators UNAVAULABLE type TA

Manufacturer: Wibroizolacja Polska

TA, TR, TB and TN type plate vibro-isolators are designed for mounting machine tools with a wide range of rotation speeds, as well as machines characterised by impulsive dynamic loads, especially:

• machine tools used for metal machining: lathes, automatic lathes, polishing machines, milling machines, slotters, presses, shears, saws, angle bending machines, etc.,

• machine tools used for machining wood: planers, thicknessers, saws, etc.,

• machines and equipment used for plastic processing,

• production, assembly, transport, bottling lines etc.,

• lines, machines and equipment used for agri-food processing,

• other machines and equipment used in various industries.

TA, TR, TB and TN plate vibro-isolators are manufactured in two main sizes: 80 and 120. Each of these sizes is available in several classes which differ in the way they are attached to the machine. The vibro-isolators are oil and grease resistant. The following versions are made on request:
- acid-proof version.
Vibro-isolators of this type are not mounted to the foundation.
All plate vibro-isolators provide level adjustment.

TA VIBRO-ISOLATOR Used for machines with threaded through-holes in their base. Levelling in the Hmin-Hmax range.	TR VIBRO-ISOLATOR Used for machines which, apart from levelling, require level adjustment in a wider range.

TB VIBRO-ISOLATOR Used for machines with threaded through-holes in their base. Levelling is done through the vibro-isolator’s screw driven into the base of the machine.	TN VIBRO-ISOLATOR Used for machines with threaded blind holes in their feet. Levelling is done through a screw driven from the bottom into the machine’s foot.

 

 

Type and size	Dimensions (mm)										Weight (kg)	Max. load on the vibro-isolator (kG)
	Dw	Dz	Dt	H min	H max	G max	M	L*	L1	H
TA-80	80	97	34	42	52	27	M12	97	55	112	0.6	450
TR-80	80	97	34	55	70	27	M12	97	75	125	0.6
TB-80	80	97	34	42	55	37	M12	97	70	125	0.6
TN-80	80	97	34	67	110	-	M12	97	70	125	0.6
TA-120	120	140	44	52	65	60	M16	140	95	162	1.5	1000
TR-120	120	140	44	70	90	50	M16	140	105	177	1.5
TB-120	120	140	44	52	70	70	M16	140	110	177	1.5
TN-120	120	140	44	75	155	-	M16	140	105	177	1.5
TA-120W	120	140	44	70	83	60	M16	140	95	177	1.7
TR-120W	120	140	44	88	108	50	M16	140	105	192	1.7
TB-120W	120	140	44	70	88	70	M16	140	110	192	1.7
TN-120W	120	140	44	93	173	-	M16	140	105	192	1.7

 

 

* screws of different length than those in the table are also available

When ordering, please give the full designation of the vibro-isolator, e.g.:

TA-120 vibro-isolator,

TA-120W vibro-isolator - tall version

Plate vibro-isolator - TALL VERSION

Size 120 vibro-isolators are also manufactured in a tall version, especially recommended in cases where there are significant impulsive dynamic loads (e.g. presses, shears, etc.) and for machines with periodically varying dynamic loads where mounting to the foundation is not required (ventilators, blowers, compressors, power generators, cooling units, pumps, etc.).

 

 

 

 

Note: Despite our greatest efforts, we cannot guarantee that the information published on this site is free of errors. Errors in the product descriptions cannot be the basis for any claims. Should you have any doubts, please contact our sales department, before deciding to purchase the product.