Order now   Enquiry
  Call us

Vibration isolators for equipment & machinery

Vibration isolators spring type DMSN

Manufacturer: Getzner Spring Solutions

Wibroizolator sprężynowy Reinicke ISOTOP DSD

Design 

The Isotop® DMSN spring vibro-isolators consist of two plate bases with an internal M8 thread and a cylindrical coil spring (according to the
DIN EN 13906-1:2001 norm). 
Its elements are protected against corrosion through cataphoretic coating (KTL), which makes them highly resistant to rusting.
Located inside the isolator is a damping core made of a specjal material called Sylodamp®, suitable for  machines with frequent starts. The material retains its elasticity and is highly durable.

Depending on the needs DMSN vibro-isolators could be attached to the base:
- directly with a screw with M8 thread,
- by use the galvanized metal base plate, type F 1-8 MSN.
If leveling of the equipmentis required, use adjusting screws type N 1-8 MSN.

Application

Isotop® DMSN: vibro-isolators are used for the foundationof machines which generate dynamic forces also at low frequencies, such as:

  • blocked heating/cooling units,
  • compressors,
  • rotarymachines, engines, turbines,
  • power generators,
  • centrifugal separatos, pumps,
  • measuring tables, control boards, scales

Information necessary for product selection

  • weight of the machine/device,
  • number and positioning of the fulcrums,
  • positioning of the centre of mass,
  • dimensions of the machine/ device,
  • livest vibration frequency (No. of rotations or cycles),
  • description of the startup process (startup frequency).

Advantages 

  • interchangeability due to the same size and threaded connections,
  • the open design of the isolator allows for effortlessly checking the spring's condition and the distance between its coils,
  • the damping core retains its elasticity and is resistant to damage,
  • high resistance to corrosion

Our services

Please make use of our knowledge and send us your enquiries. We will be happy to provide you with the information you need, carry out the necessary calculations and select the right vibro-isolators for the given equipment.

 wibroizolator DMSN Getznerwibroizolator DMSN Getzner

 Selection table

Designation 

Recommended
load rangek (kG)

Eigenfrequenz bei
max. Belastung (Hz)

 Isotop® DMSN 3 KTL  5÷11  9,5
Isotop® DMSN 4 KTL 7÷16 7,8
Isotop® DMSN 5 KTL 12÷33 8,1
Isotop® DMSN 6 KTL 18÷45 7,0
Isotop® DMSN 7 KTL 27÷63 6,2
Isotop® DMSN 8 KTL 45÷100 5,3

 

When  ordering, you need to provide the full designation of the vibro-isolator, e.g.:
Isotop DMSN 6 KTL 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: Despite our greatest efforts, we cannot guarantee that the information published on this site is free of errors. Errors in the product descriptions cannot be the basis for any claims. Should you have any doubts, please contact our sales department, before deciding to purchase the product.
Order now
© Wibroizolacja Spółka z o.o.
made by InfraNet